Värvi kontroll-lamp Scangrip MINIMATCH, 200lm, laetav, IP65
With its strong and basic functionality, the handheld MINIMATCH work light provides up to 200 lumen and features 2 COLOUR LIGHT (warm and cold), especially useful for bright and dark coloured surfaces.
The work light is easy to carry in the pocket or in the work belt with the built-in clip, ready at hand for quality check between prep-zone operations. Supplied with a two-step operating option: Step 1 = 100%, step 2 = 50% light output.
Place the lamp anywhere you want during inspection with the turnable sturdy hook or the strong built-in magnet. The flexible lamp head tilts up to 180 degrees.
As optional accessory, the SCANGRIP DIFFUSER SMALL 03.5778 minimizes reflections and hard shadows from the light. It is simply mounted directly on top of the lens and especially applicable for checking high spots while coating, as well on car dent repair and detecting dust nibs on painting.
Light source: Ultra high CRI+ COB LED
Luminous flux, lumen: 100-200
Illuminance, lux@0.5 m: 250-500
Adjustable light output: 2 levels
Beam angle: 75°
CRI: Ra > 96 CRI+
CCT: 4500-6500 K
Adjustable CCT: 2 steps
Operating time with max. lumen, h: 2
Operating time with min. lumen, h: 4
Charging time, h: 4
Battery: 3.7V / 1600 mAh Li-ion
Protection class: IP65 / IK07
Impact resistance: 1 m
The work light is easy to carry in the pocket or in the work belt with the built-in clip, ready at hand for quality check between prep-zone operations. Supplied with a two-step operating option: Step 1 = 100%, step 2 = 50% light output.
Place the lamp anywhere you want during inspection with the turnable sturdy hook or the strong built-in magnet. The flexible lamp head tilts up to 180 degrees.
As optional accessory, the SCANGRIP DIFFUSER SMALL 03.5778 minimizes reflections and hard shadows from the light. It is simply mounted directly on top of the lens and especially applicable for checking high spots while coating, as well on car dent repair and detecting dust nibs on painting.
Light source: Ultra high CRI+ COB LED
Luminous flux, lumen: 100-200
Illuminance, lux@0.5 m: 250-500
Adjustable light output: 2 levels
Beam angle: 75°
CRI: Ra > 96 CRI+
CCT: 4500-6500 K
Adjustable CCT: 2 steps
Operating time with max. lumen, h: 2
Operating time with min. lumen, h: 4
Charging time, h: 4
Battery: 3.7V / 1600 mAh Li-ion
Protection class: IP65 / IK07
Impact resistance: 1 m
| ABC klass | C - Tellimisel |
| Kaubamärk | Scangrip |
| Omadus | Laetav |
| Luumenid max (lm) | 200 |
| Kaitse klass | IP65 |
| Tüüp | Põrutuskindel |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.