Elec.torq-angle wr. 7-135 nm
• Torque units in N·m, kg.cm, dN·m, ft.lb, lb.in and angle units in degrees
• Torque range covers from 7 to 800 N·m and from 5.1 to 590 ft.lb
• It can be used CW and ACW at temperatures between 5 ºC and 42 ºC
• Memory capacity of 50 readings and up to 10 presets
• Torque, angle, torque then angle and preset modes
• Counter
• Data and set value retention during battery exchange
• Programmable automatic shut-off time
• Programmable Recalibration warning
• More advanced configurations and settings available in the user manual
• Accurate to ±2% CW and 3% ACW between 20% and 100% of max torque
• Visual (dual LEDs + backlit LCD display), audio and vibration signal
• 40-tooth fixed ratchet heads from 3/8" to ¾" square drives
• Bezel in ABS and all-metal body for higher strength and duration
• Metal handle with reverse threaded end cap to enclose AA alkaline batteries (included)
• Supplied in sturdy blow mould case
• Supplied with a factory declaration of conformity and CE marking
• Made in USA
• Torque range covers from 7 to 800 N·m and from 5.1 to 590 ft.lb
• It can be used CW and ACW at temperatures between 5 ºC and 42 ºC
• Memory capacity of 50 readings and up to 10 presets
• Torque, angle, torque then angle and preset modes
• Counter
• Data and set value retention during battery exchange
• Programmable automatic shut-off time
• Programmable Recalibration warning
• More advanced configurations and settings available in the user manual
• Accurate to ±2% CW and 3% ACW between 20% and 100% of max torque
• Visual (dual LEDs + backlit LCD display), audio and vibration signal
• 40-tooth fixed ratchet heads from 3/8" to ¾" square drives
• Bezel in ABS and all-metal body for higher strength and duration
• Metal handle with reverse threaded end cap to enclose AA alkaline batteries (included)
• Supplied in sturdy blow mould case
• Supplied with a factory declaration of conformity and CE marking
• Made in USA
| ABC класс | C - Под заказ |
| Бренд | Bahco |
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.